Sequoia is named for the giant redwoods, and it has the same warm, grounded feel. Its mid-tone brown sits right between light and dark, so it works in almost any home and any style. If you want a wood floor that feels classic instead of trendy, this is the one to look at. Each plank is a generous 10″ x 62″, long and wide enough to lay out like a custom hardwood install.

MSI’s TileTouch™ Surface Technology is what makes Sequoia so convincing. The surface texture follows the printed grain exactly, so the ridges, knots and grain you see are the ones you feel. Up close, it passes for real wood. The low-sheen matte finish adds to that, with a soft, hand-rubbed look instead of a glossy coating.

Mid-tone floors are also the most practical choice you can make. Sequoia hides dust, pet hair and everyday scuffs far better than very light or very dark floors, so it looks clean longer between sweepings. Add porcelain’s toughness and it’s a floor built for real life. It’s waterproof, it won’t dent, and it’s suited to kitchens, bathrooms, basements and high-traffic commercial spaces.

Sequoia is at home in a transitional living room, a craftsman kitchen or a warm mid-century space. It flatters greige walls, cream cabinetry, walnut furniture and aged bronze hardware equally well. For coordinated design, use it with lighter Quercia or deeper Clayborne from the same Valgrande collection.

For best results, install over a flat subfloor with a professional installer.

• Size: 10X62
• Finish: Matte
• Thickness: 0.37 inch
• Sq ft per piece: 4.478
• Pieces per box: 4
• Sq ft per box: 17.91
• 5-box coverage: 89.55 sq ft

Planning tip: always confirm your final look with a sample and keep the SKU  NVALSEQ1062-3D handy when ordering.

The post VALGRANDE SEQUOIA 10×62 MATTE 3D appeared first on Kennedy Tile LLC.

Quercia is Italian for oak, and the name fits. This Valgrande colorway has sandy blonde tones that recall pale European white oak, the light, airy look behind today’s Scandinavian and coastal interiors. At 10″ x 62″, each plank is as wide and long as premium engineered hardwood, so the floor reads as a real board layout and not a busy tile pattern.

Quercia’s realism comes from MSI’s TileTouch™ Surface Technology. The printed grain and the textured surface are made in register, so every knot and grain line has depth you can feel with your hand or bare feet. The matte finish soaks up light instead of reflecting it. That keeps the pale tones calm and natural, with none of the plastic sheen of cheaper wood-look products.

Light floors brighten a space like nothing else. Quercia bounces daylight through a room, makes small spaces feel open and gives a neutral base that works with almost any cabinet, paint or furniture choice. Because it’s porcelain, you get that bright, fresh look without worrying about blonde hardwood’s usual problems: fading from sun, water spots or dents from everyday life. It’s waterproof and tough enough for entries, kitchens, baths and busy family rooms.

For a clean Nordic look, style it with white oak cabinetry, matte black fixtures and linen textures. For a relaxed coastal feel, try soft blues and woven accents. It pairs with Valgrande Sequoia and Clayborne for coordinated tone shifts between rooms.

Large-format planks perform best on a flat subfloor with professional installation.

• Size: 10X62
• Finish: Matte
• Thickness: 0.37 inch
• Sq ft per piece: 4.478
• Pieces per box: 4
• Sq ft per box: 17.91
• 5-box coverage: 89.55 sq ft

Planning tip: always confirm your final look with a sample and keep the SKU (NVALQUE1062-3D) handy when ordering.

The post VALGRANDE QUERCIA 10×62 MATTE 3D appeared first on Kennedy Tile LLC.

Clayborne gives you the depth and drama of a dark hardwood floor without the upkeep. This colorway in MSI’s Valgrande collection has deep, earthy wood tones in an extra-wide 10″ x 62″ plank, sized to match real wide-plank hardwood. Long runs and fewer grout lines make a clean, continuous floor that helps rooms feel bigger and more upscale.

What sets Clayborne apart is MSI’s TileTouch™ Surface Technology. It pairs high-definition graphics with a matching 3D texture, so the grain you see lines up with the grain you feel underfoot. Natural knots, flowing grain and small shifts in color give each plank its own character. The matte finish keeps the look soft and natural, like real finished wood.

Because it’s porcelain, Clayborne has the beauty of hardwood without the weak spots. It’s waterproof and durable, and it holds up to kids, pets and heavy foot traffic. That makes it a smart choice for kitchens, bathrooms, mudrooms and laundry rooms. It also works in open living areas where you want one floor from the front door to the back. You’ll never have to sand or refinish it, and spills, humidity and cupping aren’t a concern.

For a modern farmhouse look, pair Clayborne with warm whites, black hardware or natural stone. For a richer, traditional feel, try brass accents and deep greens. For coordinating spaces, it also comes in Quercia (sandy blonde) and Sequoia (warm mid-tone brown).

Planks this long need a flat subfloor and professional installation, ideally with a leveling system.

• Size: 10X62
• Finish: Matte
• Thickness: 0.37 inch
• Country of origin: Spain
• Sq ft per piece: 4.478
• Pieces per box: 4
• Sq ft per box: 17.91
• 5-box coverage: 89.55 sq ft

Planning tip: always confirm your final look with a sample and keep the SKU (NVALCLA1062-3D) handy when ordering.

The post VALGRANDE CLAYBORNE 10×62 MATTE 3D appeared first on Kennedy Tile LLC.